1. Home
  2. Meta Hub
  3. Scaling & Media Buying
  4. Meta Value Rules Explained: Bid More or Less by Age, Gender, Location, Placement or OS
Scaling & Media Buying · 9 min read

Meta Value Rules Explained: Bid More or Less by Age, Gender, Location, Placement or OS

By the Power Ads teamUpdated 2026-11-201,702 words

Some customers are worth more to your business than others. A buyer in one region may reorder more often, or one placement may bring leads that close. Meta's value rules let you tell the auction that, inside a single ad set, by bidding more for the people and placements you value more and less for the ones you value less. This guide covers what value rules are, how they relate to the older bid multipliers, which criteria and bid strategies they support, the adjustment range, the limits on rules and rule sets, where to set them up and how they show in reporting. It ends with labelled practitioner use cases and the mistakes to avoid. Each rule about the feature comes from Meta's developer documentation.

What value rules are, and how they replaced bid multipliers

Meta's Marketing API documentation describes value rules as a way to adjust your bids for audiences, placements and conversion locations that you value more or less, so you can consolidate campaigns into one ad set instead of splitting them by segment. Meta's guidance is to use them when you want to identify higher or lower value audiences and are looking to pay accordingly. For regulatory compliance, Meta points to audience controls instead, and to steer delivery toward likely converters it points to audience suggestions.

Bid multipliers were the earlier Marketing API tool for the same job. They applied weights to audience segments within one ad set, and each weight could range from 0.09 to 1.0, so no weight went above 1.0. Meta's bid multiplier page now says bid multipliers are going away soon and that the bid multipliers API is going away in 2027. It describes value rules as offering enhanced bid adjustments, more flexibility and easier creation and management, and says they can be managed in Ads Manager as well as the API.

Value rules replace some bid multiplier use cases, not all of them. An ad set can use bid multipliers or value rules, but not both. Meta offers a translation API that converts an existing bid multiplier set into a value rule set, and it warns that once an ad set has been migrated, the deletion of its bid multiplier parameter set cannot be reversed. If you may need to go back, save the old set first. For campaigns using Advantage+ campaign budget, Meta rejects the migration if the bid multiplier default weight isn't 1.0.

Supported criteria

Each rule targets people or inventory through one or more criteria. Meta's value rules documentation lists these types:

  • Age: predefined ranges from 18-24 up to 65+, or custom ranges. Meta notes you should use 18+ rather than 18-65, and that 65 can't be used as an upper limit.
  • Gender: male or female.
  • Operating system: Android or iOS.
  • Device platform: mobile or desktop.
  • Location: country, region, city or Comscore market. Meta says that from June 22, 2026, DMA locations are replaced by Comscore markets and rules with DMAs won't be active after that date.
  • Placement: Facebook Feed, Stories, Reels, Marketplace, Search and Video; Instagram Feed, Stories, Reels and Explore; and Audience Network.
  • Audience labels: values such as high value, low value and new users. Meta's bid multiplier page describes this criteria type as being in closed beta.
  • Meta's value table also lists a conversion location criterion (app, instant form, phone call, website) that has no bid multiplier equivalent.
Power AdsUnlimited Meta agency ad accounts on our corporate cards, with 24/7 support on Telegram and WhatsApp, for teams spending roughly $100,000+/mo. 4% per top-up, no setup fee. Apply for access →

Eligible bid strategies, objectives and special ad categories

Value rules work only with two bid strategies: highest volume (auto-bid, LOWEST_COST_WITHOUT_CAP in the API) and cost per result goal (COST_CAP). Meta's bid multiplier page says support for ROAS goal will become available later in 2026, and that it does not plan to support bid cap with value rules. Its advice for bid cap ad sets is to move them to a cost per result goal first. Our bid strategy guide explains how these strategies differ.

Meta's documentation does not publish a full list of supported objectives, but it names two exclusions: Sales campaigns using web and in-store conversion locations, and Leads campaigns using web and call conversion locations.

Housing, employment and credit campaigns are restricted from using the age and gender criteria, and certain location types. If you run ads in those categories, see our special ad categories guide before planning rules around demographics.

Adjustment range, rule order and limits

Every rule either increases or decreases the bid. Meta documents increases of 1% to 1000% and decreases of 1% to 90%. The default bid adjustment of a value rule set is always 1.0, so people who don't match any rule are bid on as normal.

Order matters. Meta says rules are evaluated in priority order, and once a person matches a rule, evaluation stops and that rule's adjustment applies. If your rules overlap, only the first applicable rule is used. Meta's own example has rule 1 bidding 20% more for women in California; if a later rule also covered some of those women, they would get the rule 1 adjustment only. Adjustments don't stack.

Meta also states the trade-off plainly: with value rules you may see more conversions from your preferred audiences, but your overall cost per result may increase. It recommends keeping targeting as broad as your business allows, so the rules shape bids inside a wide audience instead of shrinking it. Our broad targeting guide covers that setup.

A value rule set holds 1 to 10 rules, and each rule can combine up to 4 criteria. A rule set is saved to the ad account and can be attached to several ad sets, so one well-built set can serve a whole account.

Meta's own pages disagree on how many rule sets an account can hold. The value rules documentation says you can create up to 6 rule sets per ad account. The bid multiplier migration page says each ad account may have a maximum of 20. Plan around the lower number, and check what Ads Manager or the API allows on your account before building a library of sets. Rule set caps, like spending limits and billing, apply per ad account. Power Ads supplies Meta agency ad accounts at 4% per top-up; we don't run campaigns, so bid and rule setup stays with you.

Where to create value rules, and how they show in reporting

In Ads Manager, Meta says to create rule sets on the value rules page in your advertising settings. To use one, open the ad set editor: the value rules setting is in the Conversion section. Check the Apply a rule set box, then select the rule set from the dropdown.

Some rule sets can only be edited through the API. Meta lists three cases where a set is read-only in Ads Manager: it has more than 2 criteria, it uses custom age ranges, or it uses the Facebook Marketplace, Facebook Search, Facebook Video or Instagram Explore placements.

Through the Marketing API, you create a set on the ad account's value_rule_set edge, then attach it by sending value_rule_set_id with value_rules_applied set to true, either when creating the ad set or later. Posting a new rule set ID overwrites the previous one. To detach, send value_rules_applied as false without a rule set ID; Meta notes that a valid rule set ID in the same request attaches it even when the flag is false. To update a set, Meta says to read it first and send the full payload back with existing IDs, because omitting a criterion's ID removes that criterion.

For reporting, Meta says value rules offer performance breakdowns based on the rules applied. Every rule needs a name, which Meta says helps with segmentation by rules within reporting surfaces. Use names that state the audience and the adjustment so the breakdown is readable at a glance.

Practitioner use cases

The patterns below are practitioner suggestions, not Meta guidance. Each one should be grounded in your own data, such as customer value or lead quality by segment, and checked against Meta's note that cost per result may rise.

  • Practitioner use case, lifetime value by demographic: Meta's own example is an advertiser who knows men aged 25-44 have a higher average lifetime value. If your customer data shows a similar gap, one ad set with an age and gender increase can replace separate ad sets per segment.
  • Practitioner use case, regional value: if orders from some regions or cities are worth more, or cost more to fulfil, use location rules to bid up or down instead of running one campaign per region.
  • Practitioner use case, app or device fit: if your app or checkout performs better on one operating system or on mobile than desktop, adjust by OS type or device platform.
  • Practitioner use case, placement quality: if lead quality from a placement is consistently lower in your CRM, a decrease on that placement keeps it in the mix at a lower price rather than removing it. Our placement controls guide covers when to exclude a placement outright.
  • Practitioner use case, retiring bid multipliers: if you still run bid multipliers through the API, map them to value rules before the API goes away in 2027, saving the old sets first.

Common mistakes

Most problems with value rules come from setup, not from the feature itself.

  • Overlapping rules in the wrong order: only the first matching rule applies, so a broad rule placed above a narrow one can silently override it.
  • Expecting rules to stack: a person who fits two rules gets one adjustment, not both multiplied together.
  • Using an unsupported bid strategy: bid cap is not supported and ROAS goal support was described as coming later in 2026, so check the ad set's strategy first.
  • Narrowing targeting as well as adding rules: Meta recommends keeping targeting broad, since value rules are meant to adjust bids inside one audience.
  • Leaving DMA-based location rules in place: Meta says rules with DMAs are not active after June 22, 2026, so rebuild them with Comscore markets.
  • Building sets you can't edit in Ads Manager: more than 2 criteria, custom age ranges or certain placements make a set read-only there.
  • Migrating bid multipliers without a backup: the migration deletes the old parameter set and can't be reversed.
  • Using age or gender rules in a housing, employment or credit campaign, where Meta restricts those criteria.
  • Judging by headline cost per result alone: Meta warns it may rise, so measure the value of the extra conversions from the segments you bid up.

Key takeaways

  • Value rules raise or lower bids by age, gender, location, OS, device platform, placement and other criteria inside one ad set.
  • They replace some bid multiplier use cases; Meta says the bid multipliers API is going away in 2027, and an ad set can't use both.
  • Increases go up to 1000% and decreases up to 90%; people matching no rule are bid on as normal.
  • Only the first matching rule applies, so order your rules from most to least specific.
  • Up to 10 rules per set and 4 criteria per rule; Meta's pages give 6 or 20 rule sets per account, so plan for 6.
  • They work with highest volume and cost per result goal, not bid cap, and Meta warns overall cost per result may rise.

FAQ

Are value rules the same as bid multipliers?

No. Both adjust bids by segment inside one ad set, but bid multipliers were a Marketing API feature limited to weights between 0.09 and 1.0. Value rules can raise or lower bids, can be managed in Ads Manager, and replace some bid multiplier use cases. An ad set can't use both.

How much can a value rule change my bid?

Meta documents increases of 1% to 1000% and decreases of 1% to 90%. The default adjustment is 1.0, so anyone who matches no rule gets your normal bid.

Which bid strategies work with value rules?

Highest volume (auto-bid) and cost per result goal. Meta said ROAS goal support would come later in 2026 and that it does not plan to support bid cap. Sales campaigns with web and in-store conversion locations and Leads campaigns with web and call conversion locations are excluded.

How many value rule sets can one ad account have?

Meta's pages differ: the value rules documentation says up to 6 per ad account, while the bid multiplier migration page says up to 20. Each set holds 1 to 10 rules with up to 4 criteria per rule, and one set can be attached to multiple ad sets.

What happens if someone matches more than one rule?

Meta evaluates rules in order and stops at the first match, so that rule's adjustment applies and later rules are ignored for that person. Put narrow, specific rules above broad ones.

Where do I see how each value rule performed?

Meta says value rules offer performance breakdowns based on the rules applied, and it requires a name for every rule so results can be segmented by rule in reporting. Clear rule names make those breakdowns easier to read.

Need agency ad accounts?Unlimited Meta agency accounts on our corporate cards, shared to your Business Manager through partner access. 4% per top-up, no setup fee, unused balance refunded within 24 hours (business days), free replacements, 24/7 on Telegram and WhatsApp.
@power_ads_hqGet the next one in Telegram.Meta policy shifts, spend-limit fixes and scaling notes from the Power Ads team. Join 3,000+ subscribers. Free, read-only, one tap to leave.Join channel

Sources

Power Ads background
By application only

We don't talk. We solve.

Unlimited Meta agency ad accounts on our corporate cards for teams spending roughly $100,000+ a month. 4% per top-up, no setup fee, 24/7 on Telegram and WhatsApp.

Telegram support · 24/7
TelegramWhatsAppApply