You set the ad set to women aged 25 to 44, then the breakdown shows spend on men and people over 55. Or you picked a 1% lookalike and Meta clearly reached beyond it. In most cases nothing is broken. With Advantage+ audience on, most audience inputs are suggestions, not limits, and Meta's Help Center says it will show ads to other audiences when that is likely to improve performance. This guide explains which settings are hard controls and which are suggestions, why delivery moves past the suggestions, how to check who actually saw your ads, when to switch back to the original audience options, what the account-level controls in Advertising settings do, and how special ad categories change all of this. Each rule comes from Meta's Help Center or developer documentation.
What Advantage+ audience changes
Meta describes Advantage+ audience as letting its AI find the audience for your campaign instead of you defining it. The system draws on signals such as past conversions, Meta pixel data and interactions with previous ads, and Meta says turning it on can help reach people you may not have targeted manually.
It is now the default in many setups. Meta's Help Center says that when you choose the sales, app promotion or leads objective, the Audience section shows Advantage+ on, which is the same as Advantage+ audience. Its setup article says Advantage+ audience is applied automatically when it's available. If you duplicate an older campaign that didn't use it and choose the recommended setup, it is applied automatically too.
Meta recommends A/B testing Advantage+ audience for almost all campaign types, with one stated exception: it isn't recommended for retargeting campaigns. Our broad targeting guide covers the strategy side. This guide is about the mechanics.
Audience controls vs audience suggestions
Meta splits audience settings into two groups. Audience controls limit who can see your ads. Audience suggestions tell Meta who you prefer, and Meta says it will show ads to people matching your suggestion and to other audiences when that is likely to improve performance. Suggestions never take delivery outside your controls.
- Controls (hard limits): locations, minimum age, custom audiences to exclude and languages. Meta's guidance is to use them for legal, geographic or business restrictions, when some people shouldn't see your ads.
- Suggestions (soft signals): age, gender, detailed targeting, and custom or lookalike audiences to include. Meta says suggestions don't always constrain your audience. Its own example: if you suggest women, your ads could also deliver to men if Meta's AI finds them likely to respond.
- Location has a catch. Meta says it won't target beyond your locations unless you select Reach more people likely to respond to your ads. Leave that unselected if location is a real limit.
- Custom audience exclusions are always controls. Meta says they stay controls even if Use as a suggestion is ticked.
- Lookalike audiences can't be excluded with Advantage+ audience. Meta says an exclusion would constrain the audience and reduce delivery opportunities.
- Minimum age is a control, and Meta says a minimum age set under controls can't be overruled by an age suggestion. With Advantage+ audience you can't select ages under 18, or older in some countries.
Why delivery goes outside your age range, lookalike or custom audience
Age range. Only the minimum age is a control. The upper age and the rest of the range are suggestions. Meta's Marketing API documentation is explicit: with Advantage+ audience enabled you can pass a minimum age only between 18 and 25, you can't set a maximum age, and the maximum is fixed at 65. A range of 25 to 44 entered as a suggestion therefore tells Meta who you prefer, not who to leave out.
Lookalike audiences. Meta calls using a lookalike as a suggestion Advantage+ lookalike. It uses the source custom audience as a guide and may deliver beyond the percentage you chose when it sees better performance there. Meta says this is enabled automatically for new, duplicated and draft campaigns and ad sets that use lookalikes built from mobile, website or customer list custom audiences.
Custom audiences. Advantage+ custom audience, or a custom audience used as a suggestion, lets that audience guide delivery instead of strictly limiting it. Meta says it can deliver beyond the selected audience when that's likely to improve performance, while locations, minimum age and languages still apply.
Detailed targeting. Interests and behaviours sit in the suggestion list too. In January 2025 Meta's developer blog announced the removal of detailed targeting exclusions, keeping employer exclusions at the account level; our guide to the removed exclusions covers what changed.
Put together: if the only hard limits are country and a minimum age of 18, delivery can legally reach anyone 18 or older in that country. That is the system working as documented.
How to check who actually saw your ads
Before changing settings, measure how far delivery really drifted. In Ads Manager, select the campaign, ad set or ad, click the Breakdown icon, choose By delivery and pick Age, Gender, or Age and gender. Meta lists age, gender and age and gender among the delivery breakdowns supported for offsite conversions, so you can see results as well as spend by group.
Read the numbers with two caveats from Meta's documentation. Its developer docs say breakdown values are estimated, and people who don't list a gender show as not specified. Its Help Center adds that statistical modelling may be used in breakdowns when conversion data is missing or partial.
The useful question isn't whether any spend went outside your suggestion. It is whether that spend produced results at a cost you can accept. If the groups outside your suggestion convert at a similar cost, the suggestion is doing what Meta designed it to do. If they spend without converting, you have a case for a control.
When and how to switch to original audience options
Meta frames the choice simply: if reaching a specific audience matters more than getting the best performance, turn suggestions into controls. In the Audience section, select Further limit your audience or Further limit the reach of your ads, choose Age, Gender, Detailed targeting or Custom audience inclusions, and untick Use as a suggestion where it appears. Meta says the Audience section will then usually show Advantage+ off. You can still raise the minimum age up to 25 or exclude a custom audience without turning it off.
Meta also says Advantage+ audience typically gets better results than the original audience options, and advises removing a suggestion only to reflect business needs. Reasons that fit that description include:
- Legal or policy limits, such as a product that can't be sold below a certain age. Use the minimum age control first, since it keeps Advantage+ on.
- Retargeting, where Meta itself says Advantage+ audience isn't recommended.
- A product that genuinely only serves one group, where the breakdown shows the rest of the spend isn't converting.
- Testing, where you need a clean read on one segment.
- If you only want to favour a group rather than exclude everyone else, Meta offers value rules, which let you bid more or less by age, gender, location and other factors. See our value rules guide.
- Practitioner advice (our view, not Meta guidance): change one thing at a time. Move the single setting the breakdown points to, such as age, into a control, keep everything else as suggestions, and compare cost per result over a full week before deciding. Turning every suggestion into a control at once makes it hard to tell what helped.
Account controls and special ad categories
Account controls. If a limit applies to everything you run, Meta lets you set it once in Advertising settings under Audience controls. The documented options are: limiting to specific locations (including or excluding countries or country groups), a minimum age for age-restricted goods or services, excluding people who match a selection of detailed targeting options for brand protection, and excluding an employer so ads don't reach your own employees. Meta says these apply to all campaigns in the ad account, existing ones included, that changes to existing campaigns may take up to 48 hours, and that people creating ads will see the settings under Audience but can't change them in Ads Manager creation. Using account controls doesn't change a campaign's Advantage+ state. You need access to Advertising settings, and Meta says the feature is being introduced gradually, so it may not be in your account yet. Custom audience exclusions aren't in the documented account-level list, so set those per campaign.
Special ad categories. Meta's Help Center says campaigns covered by its financial products and services, employment or housing policies, and ads about social issues, elections or politics, don't have access to Advantage+ audience. Account controls don't apply to those ads either. For housing, employment and financial products and services, Meta's developer documentation says age is generally fixed at 18 to 65+, a specific gender can't be chosen, lookalike audiences are unavailable, and location targeting must cover at least a 15-mile or 25 km radius in the US and Canada, or 15 km in Europe. These rules apply to advertisers based in the US or running ads that reach the US, Canada or Europe. Meta also says value rules can't use age, gender or location for special ad category campaigns.
API users have one more change. Meta's Marketing API v26 changelog says housing, employment and financial products and services campaigns that use targeting automation via the API must now set the advantage_audience flag explicitly, or the API returns an error. It applies from v26 and to all versions from October 27, 2026. Meta's Help Center and API documentation describe these campaigns differently, so check what Ads Manager offers your campaign. Our special ad categories guide covers the categories themselves.
If different clients or brands need different hard limits, separate ad accounts keep their account controls apart. Power Ads supplies Meta agency ad accounts at 4% per top-up; we don't set up targeting or run campaigns, so the audience choices in this guide stay with you.
Common mistakes
Most complaints about ads reaching the wrong people trace back to a handful of setup errors.
- Treating the age range as a limit. Only the minimum age is a control with Advantage+ audience on.
- Selecting Reach more people likely to respond to your ads under Locations when location is a hard business limit.
- Assuming a lookalike percentage is a boundary. Used as a suggestion, Meta may deliver beyond it.
- Duplicating an old campaign into the recommended setup and not noticing that Advantage+ audience was applied automatically.
- Turning off every suggestion because one breakdown looked wrong, instead of reading results by group first.
- Using Advantage+ audience for retargeting, which Meta says it doesn't recommend.
- Expecting account controls to cover special ad category campaigns, which Meta says they don't.
- Reading breakdowns as exact counts. Meta says the values are estimated and may include modelled data.
Key takeaways
- With Advantage+ audience on, only locations, minimum age, excluded custom audiences and languages are hard controls.
- Age range, gender, detailed targeting and included custom or lookalike audiences are suggestions that Meta may deliver beyond.
- Check Age, Gender, or Age and gender under Breakdown, By delivery before changing anything, and judge results, not just spend.
- To make a suggestion a limit, use Further limit the reach of your ads and untick Use as a suggestion; Advantage+ will usually show off.
- Account controls in Advertising settings apply to every campaign in the account but not to special ad category ads, which can't use Advantage+ audience.
FAQ
Why is Meta showing my ads to people older than my age range?
With Advantage+ audience on, the age range is a suggestion. Only the minimum age is a control. Meta's API documentation says the maximum age is fixed at 65 when Advantage+ audience is enabled. To hold an upper age, use Further limit the reach of your ads and untick Use as a suggestion.
Why are my ads reaching people outside my lookalike audience?
A lookalike used as a suggestion is Advantage+ lookalike. Meta uses the source audience as a guide and may deliver beyond the percentage you chose if it sees better performance. Meta says it is turned on automatically for new, duplicated and draft ad sets that use lookalikes built from mobile, website or customer list audiences.
Which audience settings can't Meta go beyond?
Meta lists four audience controls: locations, minimum age, custom audiences to exclude and languages. Meta says it won't target beyond your locations unless you select Reach more people likely to respond to your ads. Suggestions never take delivery outside your controls.
Can I exclude a lookalike audience with Advantage+ audience?
No. Meta says it isn't possible to exclude lookalike audiences with Advantage+ audience. You can exclude custom audiences, and Meta treats those exclusions as controls even if Use as a suggestion is ticked.
Can I set audience limits for my whole ad account?
Where available, yes. In Advertising settings, Audience controls lets you limit locations, set a minimum age, exclude a selection of detailed targeting options for brand protection and exclude an employer. Meta says these apply to all campaigns in the account, but not to ads in the financial products and services, employment, housing or social issue categories.
Do special ad category campaigns use Advantage+ audience?
Meta's Help Center says housing, employment, financial products and services, and social issue, election or political ad campaigns don't have access to Advantage+ audience. Separately, Meta's API v26 changelog says housing, employment and financial campaigns that use targeting automation through the API must set the advantage_audience flag explicitly.
Sources
- facebook.com/business/help/273363992030035
- facebook.com/business/help/938372127764391
- facebook.com/business/help/793748385630490
- facebook.com/business/help/2016171032241412
- facebook.com/business/help/25941857932125812
- facebook.com/business/help/906206294602874
- facebook.com/business/help/1212225059146059
- facebook.com/business/help/414975413946182
- facebook.com/business/help/1438478636941047
- facebook.com/business/help/1798966537090251
- developers.facebook.com/docs/marketing-api/audiences/reference/targeting-expansion/advantage-audience
- developers.facebook.com/docs/marketing-api/insights/breakdowns
- developers.facebook.com/docs/marketing-api/audiences/special-ad-category
- developers.facebook.com/documentation/ads-commerce/marketing-api/marketing-api-changelog/version26.0
- developers.facebook.com/blog/post/2025/01/21/removal-of-detailed-targeting-exclusions
