Placement settings in Meta Ads Manager have changed recently. Sales, Leads and App promotion campaigns are moving to Advantage+ placements with no placement picker in the ad set, excluded placements can now receive a small share of spend, and the hard blocks now live in your account's Advertising settings. This guide covers what Advantage+ placements does, what you can still exclude and where, how Audience Network and its block lists work, how to read placement breakdowns, and when manual placements still make sense. Each rule comes from Meta's Help Center or developer documentation, and our own advice is labelled as such.
What Advantage+ placements does
Advantage+ placements, also shown as Placements with Advantage+ on, lets Meta's delivery system choose where your ads run across Facebook, Messenger, Instagram, WhatsApp, Audience Network and Threads. Meta says it looks across all available placements to find the most efficient opportunity for each impression. It is the default and the setting Meta recommends. Meta also says that adding more placements does not increase the cost of your ad.
The key detail is what the system optimizes for. Meta says it aims for the most optimization events at the lowest average cost overall, not the lowest average cost in each placement. Its Help Center example: with a $27 budget across Facebook, Instagram and Audience Network, the advertiser gets 9 events at an average of $3. Instagram shows the highest average cost, $5, so the advertiser turns it off. The result is 8 events for $26 at $3.25 each, which is less efficient. Meta's point is that a placement with a higher average cost per result is not necessarily inefficient.
Meta also reports that in an experiment, ad sets using Advantage+ placements had an 11.7% lower cost per action on average than ad sets with manual placements. That is Meta's own figure, and your results can differ. The Advantage+ sales campaigns guide covers the rest of Meta's automated setup.
What you can still exclude, and where
Meta is gradually rolling out a change to placement settings. In the Leads, App promotion and Sales objectives, ad sets now default to Advantage+ placements and the option to make placement selections in the ad set is removed. Awareness, Traffic and Engagement campaigns still let you choose placements in the ad set. Meta's Help Center doesn't give a date for this change, and because it is a gradual rollout, what you see depends on your account.
Where ad set selection is still available, Meta's steps are: in the ad set's Placements section, edit Advantage+ placements, choose Manual placements, then clear the platforms, placements or devices you don't want. Meta's steps for Leads, App promotion and Sales still describe excluding placements under Show more settings, then Placement controls, so check what your account shows. Meta notes that excluding a placement in any ad set, or opting out of mobile or desktop devices, turns Advantage+ off. On Sales campaigns, if you pick specific mobile devices, Meta may still reach people on other devices when it's likely to improve performance, unless you turn off Reach more people across other mobile devices.
Exclusion is also no longer all or nothing. When you exclude a placement in Ads Manager, Meta's Allow limited spending to excluded placements setting lets it spend a total of up to 5% of your budget on excluded placements when that's likely to improve performance. Meta says eligible advertisers are defaulted into it when they exclude placements, that you can manage it per placement under Manage excluded placements, and that you can turn it off at any time. The Help Center lists it for the Sales, Leads, Traffic, Engagement and App promotion objectives, and cites a global analysis in which ad sets allowing limited spend saw an average 7.7% lower cost per result.
In the Marketing API it works differently. Meta's developer blog post of October 8, 2025 says limited spend is not turned on automatically when you exclude placements through the API. You set it with the placement_soft_opt_out field, the post describes it as up to 5% of spend for each excluded placement, and at launch it covered the Sales and Leads objectives. A full exclusion through the Placements API still gets no spend.
Account-level placement controls in Advertising settings
For a placement your business genuinely cannot use, Meta points you to account controls. Its best practices article says that if you have a hard constraint, use account-level placement controls to exclude specific placements or platforms, and warns that doing so may limit the effectiveness of Advantage+ placements. Meta says these controls are applied even when a campaign uses Advantage+ placements.
To set them, Meta's steps are: go to Advertising settings, click Placement controls, turn on My business can only advertise on specific placements, clear the checkboxes for the placements to exclude, then click Review changes and Confirm. The options Meta lists include Audience Network native, banner and interstitial; Audience Network rewarded videos; Facebook Marketplace; and Facebook right column. You need access to Advertising settings to do this.
Account controls apply to the campaigns in one ad account, so set them in each account you run. Power Ads supplies Meta agency ad accounts at 4% per top-up; campaign setup stays with you.
- Scope: the controls apply to all campaigns in the ad account, existing ones included, and Meta says changes to existing campaigns may take up to 48 hours.
- Campaign type: Meta says the feature controls placements for auction campaigns. Don't assume it covers reservation buys; see our reservation buying guide.
- Locked at creation: people building ads see the settings applied and cannot change them in Ads Manager creation.
- Exceptions: account controls don't apply to ads about social issues, elections or politics, or to ads about financial products and services, employment or housing.
- Availability: Meta says it is introducing the feature gradually, so it may not be in every account yet.
Audience Network: what it is and how to control it
Audience Network extends your ads to external apps. Meta lists two placements: Audience Network native, banner and interstitial, where ads appear in apps on Audience Network, and Audience Network rewarded videos, where people watch a video ad in exchange for a reward in an app, such as in-app currency or items. Meta's developer documentation adds two constraints: you can't use Audience Network alone, and in the Marketing API, video views delivery on Audience Network must use the ThruPlay optimization goal.
Practitioner view: advertisers usually exclude Audience Network for one of two reasons. Either they can't accept ads running in third-party apps, or they see results there that don't match what their own sales or lead data shows. Meta's guidance is to try brand suitability tools before excluding placements. If the concern is suitability, a block list or inventory filter is the narrower fix. If you have a hard rule against third-party apps, the account-level control above is where that rule belongs.
- Partner-publisher lists: these show where your ads could appear on Facebook in-stream reels, Ads on Facebook Reels or Audience Network. You view them in the Meta Brand Safety and Suitability Center, which requires a business portfolio. Meta says the list changes regularly.
- Publisher block lists: these stop ads running on specific Pages, profiles and apps. Meta says they can be applied to apps in Audience Network, Facebook in-stream reels, Facebook profile feed, Ads on Facebook Reels and Instagram profile feed. You can build one from the partner-publisher lists, from delivery reports, or by downloading a list into a .csv or .txt file. A list can't have more than 10,000 lines, so split longer lists into several files.
- Automatic blocks: Meta says low-volume testing apps on Audience Network are listed separately and blocked by default if you have any publisher block list. Some preloaded Android apps can't be added to a block list because they have no Play Store URL, but Meta blocks them automatically once you have any publisher block list.
- Inventory filter: Expanded, Moderate or Limited, covering in-content, Audience Network and feed ads. When it is set on the ad account, ad sets can only choose a more restrictive level.
- Account-level brand suitability: applying inventory filters, block lists and exclusions to the ad account applies them automatically to new ads, even with Advantage+ placements, and Meta says delivery for current campaigns with less restrictive settings is reset to the account settings.
- Content block lists: these cover Feed and Reels feed ads on Facebook and Instagram, and Threads feed ads. Meta says they are created through brand safety and suitability Meta Business Partners.
How to read placement breakdowns
In Ads Manager, select the campaign, ad set or ad, click the Breakdown icon, choose By delivery and pick Placement, Platform or Platform & device. Meta notes that for offsite conversions it supports delivery breakdowns including Impression device, Platform, Platform & device and Placement. It also says statistical modeling may be used in breakdowns when conversion data is missing or partial, and its developer documentation says breakdown values are estimated.
Read the rows with Meta's delivery example in mind. It shows that a placement with a higher average cost can still be part of the cheapest overall mix, and that removing it can raise the cost of the placements left. Practitioner view: use the breakdown to answer specific questions, not to prune placements by cost alone. Does the creative render properly in a placement with heavy spend? Is one placement taking spend with almost no downstream conversions in your own data? Is cost per result rising across all placements together, which points to the auction rather than placement? Our CPM guide covers that last question.
When manual placements make sense
Meta's position is that Advantage+ placements should be the default, and its alternatives article answers the usual reasons for excluding. If a placement doesn't support your format, Meta says the ad is excluded from it automatically. If the concern is cost, it suggests expanding the audience. If the concern is format fit, it points to Advantage+ creative and asset customization for placements. If the concern is suitability, it points to inventory filters and block lists.
- Hard business constraints, per Meta: if your business can only advertise on specific placements, use account controls so the rule holds in every campaign.
- Awareness, Traffic and Engagement campaigns with a specific brief (practitioner view): a Stories-only or Reels-only test, or a buy that must run in one environment, is still possible in these objectives.
- Creative built for one surface (practitioner view): if you only have vertical video, first try asset customization and check our ad specs guide. Excluding the placement is the last resort.
- Placement tests (practitioner view): to compare placements, keep the exclusion on a separate test ad set rather than the main campaign, and remember that limited spending may still deliver up to 5% of budget to excluded placements unless you turn it off.
Common mistakes
- Excluding the highest-cost placement from the breakdown. Meta's own example shows this can lower total results.
- Assuming an exclusion means zero spend. With limited spending on, which eligible advertisers get by default, up to 5% of the budget can still go to excluded placements.
- Setting the same hard rule ad set by ad set. A constraint that applies to the whole business belongs in Advertising settings, where it applies to every auction campaign, including Advantage+ placements.
- Expecting account controls to cover special ad categories. Meta says they don't apply to ads about social issues, elections or politics, or about financial products and services, employment or housing.
- Checking results right after changing account controls. Meta says changes to existing campaigns may take up to 48 hours.
- Excluding Audience Network for suitability when a publisher block list or inventory filter would do. Meta notes it can't guarantee that all content and publishers will meet your brand safety standards. Practitioner view: review delivery reports either way.
Key takeaways
- Advantage+ placements optimizes for the lowest average cost overall, not per placement, so a pricier placement can still be worth keeping.
- In Sales, Leads and App promotion, Meta is removing ad set placement selection as a gradual rollout; Awareness, Traffic and Engagement keep it.
- Excluded placements can still receive up to 5% of budget through limited spending, which eligible advertisers get by default in Ads Manager.
- Hard placement rules belong in Advertising settings, under Placement controls, where they apply to all auction campaigns, including Advantage+ placements.
- For Audience Network suitability, publisher block lists and inventory filters are narrower tools than a full exclusion.
FAQ
Can I still exclude placements in a Meta Sales campaign?
At the ad set level, increasingly not. Meta is gradually removing placement selection from Leads, App promotion and Sales ad sets, which default to Advantage+ placements. To exclude a placement for a business reason, use account controls in Advertising settings, which Meta applies even when Advantage+ placements is on.
Why are my excluded placements still getting impressions?
Most likely limited spending to excluded placements. Meta says eligible advertisers are defaulted into it when they exclude placements, and it can spend a total of up to 5% of the budget on them. You can turn it off, or allow it per placement, under Manage excluded placements.
Where are account-level placement controls?
In Advertising settings, under Placement controls. Turn on My business can only advertise on specific placements, clear the placements to exclude, then review and confirm. Meta says they apply to all auction campaigns in the ad account and changes to existing campaigns may take up to 48 hours.
Should I turn off Audience Network?
Meta recommends keeping all placements on. Practitioner view: exclude it when you have a hard rule against ads in third-party apps, or when your own conversion data shows its results don't hold up. For suitability concerns, try a publisher block list or a stricter inventory filter first.
How big can a publisher block list be?
Meta says a publisher block list can't contain more than 10,000 lines and suggests using multiple files. You can build one from partner-publisher lists, delivery reports or a downloaded list saved as .csv or .txt.
Are placement breakdown numbers exact?
Not always. Meta says statistical modeling may be used in breakdowns when conversion data is missing or partial, and its developer documentation says breakdown values are estimated. Use them to compare trends, not to audit single conversions.
Sources
- facebook.com/business/help/196554084569964
- facebook.com/business/help/965529646866485
- facebook.com/business/help/175741192481247
- facebook.com/business/help/338215489130978
- facebook.com/business/help/1462437878221374
- facebook.com/business/help/1438478636941047
- facebook.com/business/help/23942209872116948
- facebook.com/business/help/407108559393196
- facebook.com/business/help/255483958155378
- facebook.com/business/help/1314478651899918
- facebook.com/business/help/1382467665184382
- facebook.com/business/help/260992311471821
- facebook.com/business/help/1798966537090251
- developers.facebook.com/blog/post/2025/10/08/introducing-limited-spend-on-excluded-placements-in-marketing-api
- developers.facebook.com/documentation/ads-commerce/marketing-api/audiences/reference/placement-targeting
- developers.facebook.com/documentation/ads-commerce/marketing-api/insights/breakdowns
