1. Home
  2. Meta Hub
  3. Scaling & Media Buying
  4. Ads on Threads: How the Threads Placement Works, Formats, Eligibility, Brand Safety and Reporting
Scaling & Media Buying · 8 min read

Ads on Threads: How the Threads Placement Works, Formats, Eligibility, Brand Safety and Reporting

By the Power Ads teamUpdated 2026-11-20Checked against 15 sources1,665 words

If you run Meta campaigns, some of your ads may already be showing on Threads. Meta says that when you run a campaign in Ads Manager you are opted in to ads on Threads by default, which puts your image and video ads in the Threads feed. This guide covers how the rollout happened, how the placement is added or removed, which objectives and formats it supports, what happens if you have no Threads profile, how brand suitability controls apply, and how to see Threads results in reporting. Each rule comes from Meta's Business Help Center, Meta for Business, Meta's newsroom or its developer documentation. Tips based on our own judgment are labelled as practitioner tips.

The rollout timeline, as Meta documented it

Threads ads arrived in stages. Each one below is dated in Meta's own posts.

  • January 24, 2025: Meta began a limited test of ads on Threads with a small group of advertisers and people in selected regions. Its Japanese newsroom post names the US and Japan. The first ads were image ads shown between organic posts in the home feed to a small percentage of people.
  • April 23, 2025: Meta expanded ads on Threads to all eligible advertisers globally, with access to the inventory filter. The Threads feed placement became on by default for new campaigns using Advantage+ or manual placements, ads ran in selected markets at launch, and other markets were to follow as testing continued.
  • October 28, 2025: Meta's developer blog added video for the Threads feed, 4:5 rendering for single image and video ads, static 1:1 image carousels, and placement asset customization through the Marketing API.
  • January 21, 2026: Meta announced that ads on Threads would expand to people in all markets globally from the following week. The rollout was gradual over the coming months, with initial ad delivery kept at reduced levels. The same post said Advantage+ catalog ads and app ads could run on Threads, and that third-party brand safety and suitability verification was being extended to the Threads feed.
  • March 25, 2026: Meta's developer blog said app ads on Threads were available globally through the Marketing API, along with endpoints for moderating replies on Threads ads.

How the Threads placement is added or removed

Meta's Help Center lists Threads feed under Feeds: your ads appear in the Threads feed when people use the Threads app on mobile devices. The Meta for Business Threads page confirms that ads on Threads deliver on mobile only, and that the Threads feed is available for campaigns using either Advantage+ placements or manual placements.

With Advantage+ placements, Threads feed is included alongside the other default placements. To remove it, switch to manual placements and untick Threads feed. Duplicates follow the same logic: Meta says campaigns using manual placements keep their selection when duplicated, with the option to add Threads feed, while campaigns using Advantage+ placements have Threads feed on by default when duplicated, with the ability to opt out through manual placements.

Threads is tied to Instagram. Meta's developer documentation says adding the Instagram feed placement is a prerequisite for selecting Threads feed, and that an ad set delivering to Threads must include both Instagram and Threads as publisher platforms. If you drop Instagram feed from a manual placement set, Threads goes with it.

On identity: if you have a Threads account, Meta says your ads on Threads are associated with it by default. In the Marketing API, a creative used on Threads needs your Instagram account ID, your Threads account ID and your Facebook Page ID, and Meta notes that your Page information does not appear anywhere on the Threads ad. It also says Threads accounts created after January 29, 2026 have to be added to the business portfolio manually, while those created earlier were added automatically. Our placement controls guide covers Advantage+ versus manual placements in general.

Power AdsUnlimited Meta agency ad accounts on our corporate cards, with 24/7 support on Telegram and WhatsApp, for teams spending roughly $100,000+/mo. 4% per top-up, no setup fee. Apply for access →

Can you run Threads ads without a Threads profile?

Yes. Meta's Threads ads FAQ says that if you don't have a Threads account, you can still create ads on Threads using your Instagram account or Facebook Page. If you have an Instagram account, it is used by default. If you don't, your Facebook Page is used instead.

Some features do depend on the account type. Meta's reply moderation documentation lists ads created by Instagram-backed or Page-backed Threads accounts among the unsupported cases, so replies on those ads can't be moderated through the API.

Supported objectives and formats

Meta's Threads ads creation documentation lists four objectives for the Threads feed placement: Awareness, Traffic, Engagement and Sales. The March 2026 developer post adds app installs, plus app event optimization for traffic and conversion campaigns. The documentation doesn't list Leads.

Formats are image, video and image carousel. Meta's developer documentation says images and video are supported in aspect ratios from 1.91:1 to 9:16. Media taller than 4:5 is cropped and vertically centered to 4:5, and media from 1.91:1 to 4:5 isn't altered. Carousel images outside 1:1 are center-cropped to 1:1, and Threads images must be at least 500px wide. Placement asset customization lets you supply different image or video assets for Threads, but Meta's October 2025 developer post said the carousel format was not yet supported for it.

  • Captions: Meta sets a 1,000-character limit for ads targeting Threads. Over that limit, the ad is still created for Instagram but won't deliver on Threads. Meta recommends 80 to 160 characters and says hashtags and URLs are not supported in the caption.
  • No CTA button: Meta says the Threads feed ad design has no explicit call-to-action. Tapping the headline or media goes to the destination, tapping the caption expands the post and its replies, and tapping the brand icon opens the advertiser's Threads account. You still pick a CTA for your other placements.
  • Video: audio is off by default. People turn it on with the sound icon or by opening the video in the full-screen player, which shows the call-to-action.
  • Existing posts: you can promote existing Facebook or Instagram posts as Threads ads, but existing organic Threads posts can't be promoted, and boosting posts as partnership ads isn't supported for Threads.
  • Advantage+ catalog ads: only single images and image carousels are supported. Product videos fall back to images, and replies, quotes, saves and shares are disabled on these ads for now.

Brand safety and suitability on Threads

Meta's inventory filter covers ads in the Threads feed alongside Facebook and Instagram feed ads and Reels feed ads. There are three settings. Expanded shows ads next to content that follows Meta's Content Monetization Policies and is the default. Moderate excludes highly sensitive content. Limited excludes additional sensitive content and live videos. Meta says Moderate and Limited lower reach and may raise costs. On Facebook, Instagram and Threads, the filters exclude certain videos and feed content, and the feed filter is available in a listed set of languages.

Content that breaks Meta's Community Standards is excluded by default. Meta adds that suitability controls carry no guarantee that all content will match your standards.

If you apply the inventory filter at the ad account level, Meta says the setting applies automatically to new ads, even under Advantage+ placements, and ad sets can only be made more restrictive. For independent checks, Meta's January 2026 post said third-party verification already available on Facebook and Instagram feeds and Reels was being extended to the Threads feed through Meta Business Partners. See our brand safety and suitability guide for block lists and the other controls.

Reporting: how to see what Threads delivered

In Ads Manager, the Breakdown menu sits between Columns and Reports. Meta's Help Center lists breakdowns by platform, platform and device, placement, and placement and device, and notes that these values are estimated. Breaking down by platform or placement is how you separate Threads from Instagram and Facebook in one campaign.

In the Marketing API, request insights with the publisher_platform and platform_position breakdowns. Meta's insights documentation says the publisher_platform value is threads and the only platform_position for Threads is threads_feed. The same page says Meta keeps the volume of Threads ads intentionally low while the placement is in an early testing phase, so Threads lines in a placement report should be small.

For off-platform analytics, Meta suggests the SITE_SOURCE_NAME URL parameter macro to tell placements apart, and setting utm_source=threads in the creative's URL tags so third-party tools record it. Meta notes that ad delivery is not optimized for third-party tracking tools. Our UTM strategy guide covers naming conventions.

Practitioner tips and common mistakes

The tips below are our judgment, not Meta guidance. The mistakes are each tied to a documented rule. Threads is a placement setting inside each ad set, so all of this works the same on any ad account. Power Ads supplies Meta agency ad accounts at 4% per top-up; placement, creative and brand suitability settings stay with you.

  • Practitioner tip: if Threads is in your placement mix, keep primary text within Meta's 80 to 160 character recommendation for Threads so one caption serves every placement and never hits the 1,000-character cutoff.
  • Practitioner tip: check the placement breakdown before deciding to exclude Threads. Meta keeps Threads volume low and says extra placements don't raise the cost of your ad, so a small Threads line is expected rather than a problem in itself.
  • Practitioner tip: if Threads results matter to you, use placement asset customization to give it a 4:5 or 1:1 version rather than relying on automatic crops of 9:16 video.
  • Mistake: removing Instagram feed in manual placements and expecting Threads to keep running. Threads feed requires the Instagram feed placement.
  • Mistake: long captions with links or hashtags. Over 1,000 characters the ad won't deliver on Threads, and Meta says hashtags and URLs aren't supported in the caption.
  • Mistake: assuming Threads ads need their own CTA. The feed design has none, so the headline and media do the work of sending people to your destination.
  • Mistake: forgetting replies. Threads ads show replies when the caption is tapped. Meta's API lets you view, hide and reply to top-level replies, and our comment moderation guide covers the wider workflow.
  • Mistake: expecting brand-new Threads accounts to appear in the business portfolio on their own. Meta says accounts created after January 29, 2026 must be added manually.

Key takeaways

  • Threads feed is on by default with Advantage+ placements. Remove it through manual placements.
  • Threads requires the Instagram feed placement, and ads deliver on mobile only.
  • No Threads profile is needed. Meta uses your Instagram account by default, or your Facebook Page if there is no Instagram account.
  • Supported formats are image, video and image carousel, with captions capped at 1,000 characters and no CTA button.
  • The inventory filter covers the Threads feed. Use platform or placement breakdowns to see Threads results, and expect low volume.

FAQ

How do I turn off Threads ads on Meta?

Switch the ad set from Advantage+ placements to manual placements and untick Threads feed. Meta says Threads feed is on by default with Advantage+ placements and that you can opt out through manual placements.

Do I need a Threads account to advertise on Threads?

No. Meta says you can create ads on Threads with your Instagram account or Facebook Page. Your Instagram account is used by default, and your Facebook Page is used if you don't have one. If you do have a Threads account, your ads are associated with it by default.

Which campaign objectives can deliver on Threads?

Meta's developer documentation lists Awareness, Traffic, Engagement and Sales for the Threads feed placement. Its March 2026 update added app installs and app event optimization for traffic and conversion campaigns.

Can I run video and carousel ads on Threads?

Yes. Meta supports image, video and image carousel ads in the Threads feed. Video from 1.91:1 to 9:16 is supported, with anything taller than 4:5 cropped to 4:5, and carousel images are cropped to 1:1. Video plays with audio off by default.

Does the inventory filter apply to Threads?

Yes. Meta's Help Center says the inventory filter controls the sensitivity of content next to ads in the Threads feed, with Expanded, Moderate and Limited settings and Expanded as the default.

How do I see Threads results in Ads Manager?

Use the Breakdown menu and choose platform or placement. Meta notes these values are estimated. In the Marketing API, the publisher_platform value is threads and the platform_position value is threads_feed.

Need agency ad accounts?Unlimited Meta agency accounts on our corporate cards, shared to your Business Manager through partner access. 4% per top-up, no setup fee, unused balance refunded within 24 hours (business days), free replacements, 24/7 on Telegram and WhatsApp.
@power_ads_hqGet the next one in Telegram.Meta policy shifts, spend-limit fixes and scaling notes from the Power Ads team. Join 3,000+ subscribers. Free, read-only, one tap to leave.Join channel

Sources

Power Ads background
By application only

We don't talk. We solve.

Unlimited Meta agency ad accounts on our corporate cards for teams spending roughly $100,000+ a month. 4% per top-up, no setup fee, 24/7 on Telegram and WhatsApp.

Telegram support · 24/7
TelegramWhatsAppApply