Ad relevance diagnostics are three rankings Meta reports for each ad: quality ranking, engagement rate ranking and conversion rate ranking. Each compares your ad with ads competing for the same audience, in buckets from above average down to the bottom 10%, and none appears for an ad with fewer than 500 impressions. They replaced the old relevance score and are not auction inputs: the auction weighs your bid, estimated action rates and ad quality, and Meta says the last two together measure ad relevance. Use the rankings to diagnose ads that miss their goals, read all three together, and treat what they suggest as a test, not a fix.
What ad relevance diagnostics measure, and what they don't
Quality ranking is how your ad's perceived quality compared with ads competing for the same audience. Engagement rate ranking compares its expected engagement rate with those ads, and conversion rate ranking compares its expected conversion rate with ads that share your optimization goal and compete for the same audience. All three assess the ad's past performance in the auction over your chosen date range, at ad level. They are default columns in the Performance preset; in a custom preset, add them under Columns, then Customize columns.
Each ranking falls into one of the five buckets below, and Meta defines average as the 35th to 55th percentile of competing ads. The below-average labels say how far down an ad sits: bottom 20% means at least 80% of ads competing for the same audience ranked higher. To keep them accurate, Meta shows no rankings for ads with fewer than 500 impressions, and each ranking is only available for the last 35 days.
Meta is just as clear about what they are not. They aren't inputs into the ad auction, and high relevance correlates with high performance without being its only cause. Meta tells advertisers to use them on under-performing ads, not to tune ads already meeting their objectives, and says high rankings shouldn't be your primary goal and don't guarantee more results. Some high-performing ads carry below-average rankings, and Meta says that's OK.
- Above average
- Average: the 35th to 55th percentile of competing ads
- Below average (bottom 35% of ads)
- Below average (bottom 20% of ads)
- Below average (bottom 10% of ads)
Quality ranking: feedback and low-quality attributes
Quality ranking measures perceived quality, and Meta names the kinds of signals behind it: feedback from people viewing or hiding the ad, and assessments of low-quality attributes such as withholding information, sensationalized language and engagement bait. In Meta's terms, withholding means holding back context to entice a click, sensationalized language means exaggerated headlines or commanded reactions that set up an unexpected experience on the landing page, and engagement bait urges people to like, comment or share inauthentically. The signals Meta says it monitors to measure ad quality are listed below.
The page after the click counts too. Meta lists low-quality landing page attributes: little substantive or original content, too many ads relative to content, disruptive pop-ups or interstitials, content split across several pages, and misleading experiences such as misrepresented products or shipping times. Meta's October 2026 explainer describes ad quality as the whole experience, drawing partly on more than 200 million customer survey responses a year on purchase satisfaction, shipping delays, unexpected charges and whether people felt misled. A weak quality ranking can start after the click, not in the creative.
Keep ranking and review apart. A below-average quality ranking compares your ad with competitors; it isn't a rejection. Rejections come from ad review, which checks ads against Meta's Advertising Standards, and the attributes overlap with policy: Meta says it rejects ads it detects violating its low quality or disruptive content policy. Our guide on how Meta ad review works covers that separate check, and our rejected ads guide covers reading and fixing a rejection. Meta may also notify you when low-quality attributes are severely affecting an ad's performance.
- Hide ad
- Hide all ads from this advertiser
- Hide ad due to repetition
- Report ad
- Landing page bounce rate and dwell time
Engagement rate ranking: expected engagement versus competing ads
Engagement rate ranking compares your ad's expected engagement rate with ads competing for the same audience. Meta defines that rate as the likelihood a person will click, react to, comment on, share or expand the ad, so it is a prediction, not the click-through rate in your report. It isn't available for dynamic creative or for ads optimizing for ad recall lift, impressions, reach, custom conversions or value.
It can't be gamed with bait. Meta says engagement-baiting, such as asking for likes or comments, won't improve performance, and engagement bait is one of the attributes that can drag down quality ranking. Meta's reading of a below-average engagement ranking on its own is that the ad isn't spurring interest, and its fixes are to make the ad more engaging, interesting or eye-catching, or to reach an audience more likely to interact.
In practice, test what earns the first interaction: the hook, the opening seconds, the format and the first line of copy. Check the ad's history as well. A ranking that slides on an ad that has run for weeks, with frequency climbing, fits creative fatigue. For eligible ad sets, Meta flags this in the Delivery column when people have seen the creative too many times: Creative limited once cost per result runs above your past ads, and Creative fatigue once it reaches twice as much. Our frequency and ad fatigue guide covers that pattern.
Conversion rate ranking: expected conversion versus competing ads
Conversion rate ranking compares your ad's expected conversion rate with ads that have the same optimization goal and compete for the same audience, so an ad optimizing for purchases is compared with other ads optimizing for purchases. Meta defines the rate as the likelihood that a person who viewed your ad completes your optimization goal. The base is people who saw the ad, not people who clicked, so a weak hook can pull this ranking down as well as a weak page.
Products differ, and Meta says so: some naturally convert at lower rates than others in the same auction, and it expects high-price or high-consideration items such as jewelry to rank lower on conversion than cheaper, lower-consideration items such as t-shirts. The same exclusions apply as for engagement rate ranking, including custom conversions and value, so ads optimizing for value get no conversion rate ranking at all.
When engagement holds but conversion lags, Meta points past the click: improve the call to action or the post-click experience, or target a higher-intent audience, and if conversions meet your expectations, you may not need to change anything. Check measurement before rewriting pages. Meta notes that problems with the pixel, Conversions API or SDK can lower the volume of attributed events and raise cost per action, so rule out a tracking gap before you blame the page.
Reading the combinations: what each pattern tells you to fix
Meta says the rankings read together tell you more than any one alone, and its guidance maps each combination to a likely cause. Two rules sit under that map: moving a ranking from below average to average matters more than moving average to above average, and the aim is the right fit between creative and audience, not an ideal creative or ideal audience on its own, since the best creative for one audience may not suit another.
Treat each diagnosis below as a hypothesis. Change one variable, run it against the original in a controlled test and judge it on cost per result, as our creative testing guide sets out, not on the next ranking. Adding an ad to an ad set, or changing its creative, sends the ad set back into learning, so schedule tests instead of making ad hoc edits. For the conversion-side patterns, test the page as well as the ad; our landing page speed guide covers load time.
If all three rankings are average or above, Meta's advice is simply to optimize for your objective, and an ad already hitting its cost per result goal needs no rescue whatever its rankings say. For every other pattern, Meta's diagnosis and a test worth running are below.
- Quality below, the others average or above or not eligible: seen as low quality. Test a version without withheld information, exaggerated claims or engagement asks, audit the landing page, or try an audience more likely to see the ad as high quality.
- Engagement below, the others average or above: not spurring interest. Test new hooks, opening frames and formats, or an audience more likely to interact.
- Conversion below, the others average or above: not producing conversions. Test the call to action, offer and post-click page, or a higher-intent audience.
- Engagement and conversion below, quality average or above: no interest and no conversions. Test a new concept with a reworked post-click experience, or a different audience.
- Quality and engagement below, conversion average or above: low quality and low interest. Test cleaner creative that is also more relevant to the audience.
- Quality and conversion below, engagement average or above: Meta reads this as click-baity or controversial. Test a version that represents the product more plainly.
- All three below: room for improvement across the board. Test targeting, creative, optimization goal and post-click experience, one at a time.
How the rankings relate to the ad auction and your CPM
Each time there's a chance to show an ad, Meta runs an auction among eligible ads. The ad with the highest total value wins, subject to a price floor, and total value combines your bid, estimated action rates, meaning the probability a person engages with or converts from the ad, and ad quality. Meta says the last two together measure ad relevance, so a more relevant ad can win against ads with higher bids. Its October 2026 explainer lists the same three among the auction's main inputs and adds that the highest bid or biggest budget doesn't automatically win.
The rankings track the same ideas, quality ranking against ad quality and the engagement and conversion rankings against estimated action rates, but Meta states that the diagnostics aren't auction inputs. They report afterwards how your ad compared. Raising a ranking is never the lever; improving what it measures is. Meta says more relevant ads cost less and see more results, that it subsidizes relevant ads in the auction, and that ads with a lower quality ranking tend to cost more, which may reduce distribution and lead to fewer results.
So a below-average ranking is one candidate explanation when an ad's CPM runs above its peers, alongside audience, placements, optimization goal and competition. Read price carefully, though. Meta notes that when you optimize for conversions, CPM may not be a good indicator, because the system may go after pricier impressions to get cheaper conversions. A higher CPM with an above-average conversion ranking can still be the best buy. Our CPM guide covers reading the price itself.
When diagnostics mislead: low volume, small audiences and new ads
Volume first. Rankings don't appear below 500 impressions, a floor Meta sets for accuracy, so an ad just past it is judged on a thin sample. Widen the date range, within the last 35 days that Meta reports, and look for a ranking that holds across several reads before acting. High ad volumes make this worse: Meta notes that the more ads and ad sets you run, the less its delivery system learns about each, and impressions spread thinner too.
Every ranking is also relative. Because each one compares your ad with ads competing for the same audience, it can move when that competition changes, such as during a seasonal peak, even if your ad didn't. Small audiences such as retargeting pools compete against a different set of ads than broad prospecting does, so compare rankings between ads aimed at similar audiences, not across them.
New ads need patience. Meta says performance is less stable during the learning phase, so results from that period aren't necessarily indicative of future performance, and its cost troubleshooting starts by checking that the ad set has exited learning. Don't edit an ad over an early ranking alone, since a creative change sends the ad set back into learning, as our learning phase guide explains. Discount the diagnostics in the cases below.
- Fewer than 500 impressions, or only just over
- The ad set is still in the learning phase
- Dynamic creative (no rankings), or goals such as value, reach or custom conversions (no engagement or conversion ranking)
- High-consideration products ranked on conversion against cheaper ones
- Ads already meeting their cost per result or ROAS goal
Tracking rankings across many ads and ad accounts
Across hundreds of ads, pull the rankings through the Marketing API instead of Ads Manager. Meta's official Python Business SDK lists them as Insights fields named quality_ranking, engagement_rate_ranking and conversion_rate_ranking, returned as text, but the current public Insights field reference doesn't list them, so confirm with a test call before building a pipeline on them. Insights calls need the ads_read permission. Request the rankings at ad level, with the level parameter set to ad on the account's insights edge, keep the date range within the 35 days Meta says they cover, and store each pull if you want a longer history. Save impressions and optimization goal alongside, so sub-500 ads and excluded goals aren't misread.
Meta's Insights best practices help at volume: filter on impressions so ads without delivery drop out, prefer date presets to custom ranges, and switch to asynchronous jobs when synchronous calls time out. Our Meta system users guide covers giving the pipeline its own identity and token. Then compare like with like: the same creative can rank differently in two accounts if the audience, country, placements, optimization goal or landing page differ, so check those first when rankings diverge.
Don't jump to the account as the explanation. Meta defines the rankings as comparisons between ads, not as a rating of your account. It does document account-level factors: it may use data about you and your ad account to make adjustments that could affect auction outcomes and prices, for example to improve ad quality and relevance or to enforce its policies, and repeated policy-violating or low-quality ads, or not completing advertiser verification, may lead its systems to treat all ads from the Page, domain, ad account or other associated entities as lower quality. Check Business Support Home and verification status. Because Meta names the Page and domain, moving the same ads to another account isn't a fix.
The same holds on agency ad accounts. Power Ads creates accounts in its own business portfolio and shares them into your Business Manager through partner access, with its corporate cards on every account; it supplies the accounts and doesn't build, run, optimize or monitor campaigns, creative or tracking. Ads from every account compete in the same auctions, so improving rankings stays with your team: creative, audience and the post-click experience.
Key takeaways
- Ad relevance diagnostics are three ad-level rankings, quality, engagement rate and conversion rate, that compare your ad with ads competing for the same audience once it has 500 impressions.
- Meta says the rankings aren't auction inputs; the auction weighs bid, estimated action rates and ad quality, and the last two together measure relevance.
- Read the three together, prioritize lifting below-average rankings to average, and treat each pattern as a hypothesis to test on cost per result.
- Discount rankings on ads near the 500-impression floor, in learning, on excluded goals, or already meeting their targets.
- When rankings differ across ad accounts, compare creative, audience, optimization goal and landing page first, then check Business Support Home and verification status.
FAQ
What is ad relevance on Meta?
In Meta's auction, ad relevance is the combination of estimated action rates, the predicted chance that a person engages with or converts from an ad, and ad quality, judged from feedback and low-quality attributes. Together with your bid they make up the ad's total value, and the highest total value wins, subject to a price floor, so a more relevant ad can beat a higher bid.
What are the three ad relevance diagnostics?
Quality ranking compares your ad's perceived quality with ads competing for the same audience. Engagement rate ranking compares its expected engagement rate with those ads. Conversion rate ranking compares its expected conversion rate with ads that share your optimization goal and audience. Each runs from above average down to below average, bottom 10% of ads.
Do ad relevance diagnostics affect the auction or my CPM?
Not directly. Meta says the diagnostics aren't inputs into the ad auction; they report how an ad compared after the fact. What they describe, ad quality and expected engagement and conversion, does shape auction outcomes, and Meta says more relevant ads cost less and see more results. Improve the ad, not the ranking.
Why don't I see ad relevance diagnostics for my ad?
Check impressions first: rankings don't appear for ads with fewer than 500. They are also limited to the last 35 days and unavailable for dynamic creative, and engagement and conversion rate rankings aren't available for ads optimizing for ad recall lift, impressions, reach, custom conversions or value. In a custom column preset, add the three columns manually.
Do agency ad accounts change ad relevance rankings?
Not by themselves. Rankings compare your ad with competing ads, so creative, audience, optimization goal and the post-click experience drive them wherever the ad runs. Meta does say repeated low-quality or policy-violating ads can lead it to treat ads from a Page, domain or ad account as lower quality. Power Ads supplies agency ad accounts; campaigns and creative stay with you.
Sources
- facebook.com/business/help/403110480493160
- facebook.com/business/help/436113280262012
- facebook.com/business/help/303639570334185
- facebook.com/business/help/2351270371824148
- facebook.com/business/help/617529305373441
- facebook.com/business/help/430291176997542
- facebook.com/business/help/423781975167984
- facebook.com/business/help/1767120243598011
- facebook.com/business/help/2727273724224874
- facebook.com/business/help/1346816142327858
- facebook.com/business/help/1364841787225722
- facebook.com/business/help/112167992830700
- facebook.com/business/help/316478108955072
- facebook.com/business/ads/ad-auction
- facebook.com/business/news/how-metas-ads-system-matches-your-ad-to-the-right-person
- developers.facebook.com/documentation/ads-commerce/marketing-api/insights
- developers.facebook.com/documentation/ads-commerce/marketing-api/reference/ad-account/insights
- developers.facebook.com/documentation/ads-commerce/marketing-api/insights/best-practices
- raw.githubusercontent.com/facebook/facebook-python-business-sdk/main/facebook_business/adobjects/adsinsights.py
